mini Wireless 4G HDMI DVR  User manual VH_C for UAV/drones

1 Brief 

mini 4G HDMI DVR(VH_C) has to be setup by windows software tool(lan_search_config_tool) over ethernet cable, while 5G model can be configured by an android phone APP-MCP over wifi.

 

Terms,

The device, means the 4G DVR,

3 Hardware Desc

1 Power input&video input

HDMI

 

 

 

2 SIM card&TF card&LEDs

 

3Audio&serial port

pls note, there is a switch between digital audio input(from HDMI camera) and analog audio input(from external MIC)

4 LED

 VIDEO/RF/PWR all light up, indicates all OK, video OK, 4G network OK, and register to VMS/smarteye ready.

 

How to config the mini 4G DVR

2 ways to config a 3G/4G wireless DVR

1) connect the DVR to a PC by Ethernet cable, and run the lan_search_config_tool (sacdil_pc.exe), to find the DVS in LAN and configure it.

2) run smarteye/client(manager.exe) to config the DVS remotely when it get connected to smarteye server.

 

LAN search and config tool Intro

A windows tools software is provide to search and configure the DVR in LAN.

Before run the tool, the device has to be connected to a PC via the mini-usb cable,as shown below,

  connect directly to the PC

 

 or both PC and device connect to a HUB/LAN switch, as shown below, till u see 

 

 

Run sacdil_pc.exe

change server IP/port

Double click on the device, input the correct smarteye server IP and PU port for register into the server, that’s all for config.

 

After config done, process below “Apply” to inform the DVS and this config shall be saved in the device. 

firmware upgrade

To select the firmware_xxx_date.bin, and press apply, the firmware file will be transferred to the device via network and be burned into the FLASH on device, a message will popup when all done.

 NOTE:

Upgrading using TCP/IP, so your PC must have a same IP as the device, for example,the device has a default IP, 192.168.6.232 as shown below,

 

so your PC must have an IP like 192.168.6.xxx,e.g. a 192.168.6.99 will be OK .

NOTE: this IP may be change to anything as you will.

Change APN setting for 3G/4G LTE

Connect the DVS to a PC via the Ethernet cable, and run sacdil_pc.exe

 

 

VMS/smarteye software

about smarteye C/S client monitor&manager, https://www.besovideo.com/en/detail?t=1&i=87

FAQ for server-E WEB software, https://www.besovideo.com/en/detail?t=1&i=166

for more about about recording in mobile CCTV solutions, pls refer to   https://www.besovideo.com/en/detail?t=1&i=146

setup a linux based mini 4G DVR/NVR by MCP over wifi hotspot, https://www.besovideo.com/en/detail?t=1&i=118

anti-jitter, star-light night vision, explosion-proof 4G/5G/GPS body camera DVR, 4G/5G/GPS helmet camera DVR/hardhat camera, AI box, vehicle mount mDVR, GPS tracker, 4G/5G HDMI DVR for drones/UAV, fixed/cable IPcamera, all-in-one dome PTZ 4G/5G camera, RTK/UWB, 4G torch camera DVR, glass camera/AR glass camera, all in large scale VMS/smarteye.