https://www.besovideo.com/en/detail?t=1&i=118 

 

 

LAN search and config tool Intro

A windows tools software is provide to search and configure the DVS in LAN.

Before run the tool, the device has to be connected to a PC via the mini-usb cable,as shown below,

  connect directly to the PC

 

 or both PC and device connect to a HUB/LAN switch, as shown below, till u see 

 

 

Run sacdil_pc.exe

change server IP/port

Double click on the device, input the correct smarteye server IP and PU port for register into the server, that’s all for config.

 

After config done, process below “Apply” to inform the DVS and this config shall be saved in the device. 

firmware upgrade

To select the firmware_xxx_date.bin, and press apply, the firmware file will be transferred to the device via network and be burned into the FLASH on device, a message will popup when all done.

 NOTE:

Upgrading using TCP/IP, so your PC must have a same IP as the device, for example,the device has a default IP, 192.168.6.232 as shown below,

 

so your PC must have an IP like 192.168.6.xxx,e.g. a 192.168.6.99 will be OK .

NOTE: this IP may be change to anything as you will.

 

 

 

Change APN setting for 3G/4G LTE

Connect the DVS to a PC via the Ethernet cable, and run sacdil_pc.exe

 

VMS/smarteye software

FAQ for server-E WEB software, https://www.besovideo.com/en/detail?t=1&i=166